Launch DIY Scanner CReader821 Auto Diagnostic Tool OBD2 Scanner
The Launch Creader CR821 is built to take your diagnostic experience to a whole new level. Loaded with TPMS sensor reset, oil service reset, battery registration and reset, parking brake pad relearn after replacement and diesel particulate filter regeneration functions, CR821 can access the available modules for the best diagnosis operations.
CR821 OBD2 Scanner Support Multi-language
English, French, German, Spanish, Italian, Russian, Portuguese, Dutch , Korean，Japanese,Turkish，ceskye
Launch Creader CR821 car diagnostic tool Function
1. Engine Check
(I/M readiness status, Query freeze frame data, Read current DTCs, Clear DTCs, O2 sensor monitoring test, On-board monitor test, On-board system or component control, Read vehicle information )
The auto bleed procedure is used on BOSH 5.3 equipped vehicles. This procedure uses a scan tool to cycle the system solenoid valves and run the pump in order to purge the air from the secondary circuits.
Your airbag crash data module will be restored back to its factory condition after accidents
4. Oil Service Reset
Allows you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil.
5. EPB Electrical Brake Pad Reset
it is important in the maintenance of electronic braking system's safety and efficiency when replace brake pad or motor
6. BMS Battery System
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the new battery replacement, and activate the rest state of the vehicle battery system
7. DPF Diesel Particulate Filter Regeneration
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
Notice: DPF Function have either reset or regeneration,
please leave us message first with car model and release year, thank you!
If need DPF, please tell us car model and release year to confirm if it can support
8. TPMS Tire Pressure Sensor Reset
Makes tpms senser in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and activate tpms sensors.
Launch CR821 Diagnostic Scanner Support Car List:
Support car models for OBDII diagnostic function:
All cars that suport OBDII, from 1996 to present.
Note: You can check the car coverage list on the package.
How to update the software of CR821?
1. Go to the official website of LAUNCH "www.dbscar.com", click "Products" -> "creader 401~981"; find the "creader 821", then down load the update tool to your computer.
2. Install the update tool on your computer
3. Connect the Creader 821 to your computer via the USD data lines in the package.
4. Run the update tool software, fill in the serial number and register code of creader 821(The serial number and register code will be found on the screen when you conect creader 821 to your PC), click the update. Please keep the device connected and ensure the network works well.
Screen: 4.0" TFT 320*480 dpi
Voltage range: 9-18V
Operating Temperature: 0~ 50
Environment Temperature: -20~70
Dimension: 195mm*86mm*32 mm (7.6" *3.4 " *1.2 ")